NB-IoT CO2 Traffic Light with Reporting & Notification

NBS-180 - Narrowband IoT

Local Signaling and fast Notifications

The device measures continiously the CO2 concentration in the ambient air. Following signaling scheme is provided by the NBS-180:

  • <1000 ppm: Green LED blinks every 10 minutes
  • 1000-1500 ppm: Yellow LED blinks every 5 minutes
  • >1500 ppm: Red LED blinks every minute, acoustic signal via integrated buzzer, notification via email to the person in charge (configurable)

CO2 Sensor

  • No moving parts
  • Range 400-5000ppm
  • Ultra Low Power Consumption for longest battery lifetimes
  • Accuracy +/-30ppm +/- 3% of reading
  • Internal Self Correction Algorithms
  • Life Expectancy >15 years


  • CO2
  • Temperature
  • Relative Humidity
  • Optional VOC / TVOC / eCO2 Air Quality
  • Proactive "Battery Low" message
  • Intelligent Battery Saving Mechanisms
  • Firmware update-capable via radio
  • Protocols: MQTT, LwM2M
  • Actuators: Very bright RGB-LED (green, yellow, red), integrated buzzer

Technical data:

Standards ./.
LxWxH [mm] 120x80x25
Material ABS, white
IP Rating IP20
Power Supply
External Connector ./.
Internal 3x AA 3.6V (Li)
Typ. Power Consumption depending on configuration
Interfaces / Sensors
CO2 Accuracy: +/- 30 ppm +/- 3% of measurement, self-calibrating
Temperature Accuracy: +/- 0.3°C
Resolution: 0.01°C
Range: -40..+85°C
Relative Humidity Accuracy: +/-2%RH
Resolution: 0.024%RH
Range: 0..100%RH
Air Quality (optional) Sensor Specification
Air Pressure (optional) Accuracy: +/- 1.5 mBar
Resolution: 0.01 mBar
Range: 300..1200 mBar
Operating Temperature 0-50° C
Operating Rel. Humidity 0-85% rH, non condensing
Storage -30..+60 °C
Safety / EMC / RF CE
Tariff Information 9031 8038

Communication LTE
Bands B3/ B8 / B20/ B28
Standards LTE Cat NB1 (NB-IoT)

Please contact us for LTE-M/Cat-M1.
Date: 09/08/20, Version: V1.0


pikkerton GmbH
Wohlrabedamm 16
D-13629 Berlin
Tel.: +49 30 3300724-0

Contact  Imprint  | pikkerton GmbH - Phone: +49.30.3300724-0