Data sheet

Multi Protocol Multi Sensor


Technically a jack of all trades and very communicative

Besides various integrated sensor elements the XBS-200 communicates via a large amount of wireless protocols: e.g. Narrowband-IoT ("NB-IoT" / "Cat-M1"), WiFi, wireless M-Bus, ZigBee and also LoRa (soon). Due to its extreme power-saving modes, it has a very little power consumption and a flexible battery configuration either with 2x AA or 4x AA, optimal for a long battery lifetime os several years.


  • Temperature
  • Relative Humidity
  • VOC (air qualitiy)
  • CO2 equivalent
  • Brightness
  • UV
  • Movement
  • Vibration, Tap, Orientation
  • Static Air Pressure
  • Inspection of 1 potential-free pulse input
  • 1x Relay Output 48VDC, 100mA
  • 120 x 120 x 25 mm
  • „Battery-Low“ message
  • Firmware upgradable by radio (OTA / over the air)

Technical Data:

Standards ./.
W x H x D [mm] 120 x 120 x 25
Material Polystyrol, white/black
IP Rating IP 30
Power Supply
External Voltage 5-24 VDC
External Connector mini-usb or terminal screw
Internal 2 banks with 1 or 2 batteries each, AA, up to 12000 mAh possible
Typ. Power Consumption [mA] << 1
Interfaces / Sensors
Temperature Typ. +/- 0.2 °C (-40°..+90°C)
Rel. Humidity Typ. +/- 1.5 %RH (0..80% rh)
Static Air Pressure Resolution: +/- 0.005 hPa (5 cm)
Relative Accuracy: +/- 0.06 hPa (50 cm)
Absolute Accuracy: +/- 1 hPa (8 m)
VOC TVOC [mg/m3]
<0.3 = Very good Air Quality
0.3 - 1.0 = Good Air Quality
1.0 - 3.0 = Medium Air Quality
3.0 - 10.0 = Poor Air Quality
>10.0 = Bad Air Quality
CO2 Equivalent Calculated, in ppm
Brightness Resolution: Up to <100 mlx
Dynamic: Up to 128000 lx
UV 280..400 nm (UVA/UVB)
Vibration, Shock, Orientation Yes
Motion (IR) PIR, detection range ~6 m, FoV ~90°
People Counting Mounted upon door frame: Device detects whether people going into the room or come out
Dry Contact 1x
Serial Connectivity Optional: UART, RS232/485 (ModBus), USB, CAN
Configuration Via USB (serial): File Upload or console
Communication Protocol Data MQTT
Security Opt. TPM module
Operating Temperature +5..+35 °C, other ranges on demand
Storage -20..+60 °C
Safety / EMC / RF CE
Tariff Information 8517 6100

Communication ZigBee PRO 3.0
Protocol / Frequency IEEE 802.15.4 ZigBee,  max. 250 KBit/s, ISM 2.4 GHz
Role / Mode Router
Max. direct joined end nodes 20, use further routers for additional end nodes
Transmit Power max. +19 dBm
Receive Sensitivity max. -103 dBm
Antenna Internal Wire Antenna
Encryption AES128

Communication Wireless M-Bus (MBS-)
Protocol / Frequency OMS / Wireless M-Bus 868 MHz
Role / Mode End-Node
Operation Mode: T1
TX Cycle:
60s mains powered
300s battery powered
Transmit Power +10 dBm
Receive Sensitivity -112 dBm
Antenna Internal, PCB

Communication Wireless LAN
Protocol / Frequency IEEE 802.11 b/g/n (2,4-2,5 GHz)
Role / Mode Configuration: Access Point
Operation: Client
Transmit Power max. +20 dBm
Receive Sensitivity max. -98 dBm
Antenna Internal, PCB
Encryption WEP, WPA, WPA2

Communication LTE
Bands B1/ B20/ B28
Contact us for other bands
Standards LTE Cat M1 & Cat NB1 (NB-IoT)

Ordering / Options:
For project inquiries and configuration options please contact us.
Date: 03/04/19, Version: 1.0

pikkerton GmbH
Wohlrabedamm 16
D-13629 Berlin
Tel.: +49 30 3300724-0
Email to pikkerton

Contact  Imprint  | pikkerton GmbH - Phone: +49.30.3300724-0