The easy programmable ZigBee-Gateway ZBG-100 consists of a GHz class ARM-based CPU with strong peripheral components like Gigabit Ethernet, one SD-Card slot for data logs or applications and a 2.4 GHz ZigBee coordinator module.
The 230V power supply is integrated, therefore the device can start immediately after getting plugged into a wall socket.
For a quick and easy start a web-based frontend is available. Each ZBS device can get configured very comfortable now.
With our SNMP implementation you can map each ZBS device easily into your existing management system or address it directly from your IT system. Alam notifications are sent through SNMP traps.
All incoming data from the connected sensors are getting stored locally in CSV files. A log rotation mechanism prevents from exhausted memory. The CSV files can get transferred via SSH, SCP or HTTP.
|External Voltage||100-240 VAC 50-60 Hz
|External Connector||Euro plug, opt. US/UK|
|Typ. Power Consumption||depending on configuration|
|CPU||Marvell Kirkwood, Sheeva-Core, ARMv5TE compliant, 800 MHz – 1,2 GHz
L1 Cache: 16K Instruction, 16K Data
L2 Cache: 256 KB
|Memory||512 MB DDR2 400 MHz, 16-Bit Bus
512 MB NAND Flash
|RTC||available, battery buffered|
|Interfaces / Sensors|
|Protocols||SMTP / Email
SNMP V1, 2c, 3
SNMP Traps V1, 2c, 3
ModBus TCP Slave
|Network||1x 10/100/1000 Gigabit Ethernet|
|USB||1x USB 2.0 (Host)
2ns USB slot (Mini-USB) not usable
|Operating Temperature||+5..+35 °C|
|Operating Rel. Humidity||non-condensing, only for dry rooms|
|Safety / EMC / RF||CE|
|Tariff Information||8517 6100|
|Protocol / Frequency||IEEE 802.15.4 ZigBee, max. 250 KBit/s, ISM 2.4 GHz|
|Role / Mode||Coordinator|
|Max. direct joined end nodes||10, use further routers for additional end nodes|
|Transmit Power||+10 dBm (+10 mW)|
|Receive Sensitivity||-102 dBm|
|Antenna||Internal Wire Antenna|
The information in this document is provided in connection with pikkerton products. With the exception of takes for the sale of these products in the terms and conditions set out details of pikkerton pikkerton no liability. pikkerton closes in connection with the sale or use of pikkerton products, either express or implied, or guarantee, including any liability or warranty as to the fitness for a particular purpose, merchantability or infringement of patents, copyrights or other intellectual property rights. pikkerton provides the above information to assist its clients available, but makes no representations or warranties as to the quality, reliability, functionality, or compatibility of the products. All information about upcoming products and plans pikkerton are preliminary and may be changed at any time without prior notice. pikkerton products are not intended for use in medical, life saving, or life-sustaining applications, or otherwise for critical control functions, safety systems or nuclear facilities. pikkerton reserves the right to change specifications, product descriptions and plans at any time and without notice. The information contained herein supersedes all previously published specifications for these components pikkerton. pikkerton and pikkerton logo are trademarks or registered trademarks of pikkerton GmbH