Data sheet

Multi Protocol Multi Sensor


Technically a jack of all trades and very communicative

Besides various integrated sensor elements the XBS-200 communicates via a large amount of wireless protocols: e.g. Narrowband-IoT ("NB-IoT" / "Cat-M1"), WiFi, wireless M-Bus and also ZigBee. Due to its extreme power-saving modes, it has a very little power consumption and a flexible battery configuration either with 2x AA or 4x AA, optimal for a long battery lifetime os several years.


  • Temperature
  • Relative Humidity
  • VOC (air qualitiy)
  • CO2
  • Brightness
  • UV
  • Movement
  • Vibration, Tap, Orientation
  • Static Air Pressure
  • Inspection of 1 potential-free pulse input
  • 1x Relay Output 48VDC, 100mA
  • 120 x 120 x 25 mm
  • „Battery-Low“ message
  • Firmware upgradable by radio (OTA / over the air)

Technical Data:

Standards ./.
W x H x D [mm] 120 x 120 x 25
Material Polystyrol, white/black
IP Rating IP 30
Power Supply
External Voltage 5-24 VDC
External Connector USB-C or terminal screw
Internal 2 banks with 2 batteries each, AA, up to 12000 mAh possible
Typ. Power Consumption [mA] << 1
Interfaces / Sensors
Temperature Typ. +/- 0.2 °C
Rel. Humidity Typ. +/- 1.5 %RH
Static Air Pressure Resolution: +/- 0.005 hPa (5 cm)
Relative Accuracy: +/- 0.06 hPa (50 cm)
Absolute Accuracy: +/- 1 hPa (8 m)
VOC & CO2 Equivalent TBD
CO2 Range: 40000 ppm
Accuracy: +/- (30 ppm + 3% MV)
(25 °C, 400 - 10000 ppm)
Brightness Resolution: Up to <100 mlx
Dynamic: Up to 128000 lx
UV 280..400 nm
Vibration, Shock, Orientation Yes
Motion (IR) PIR, detection range ~6 m
Dry Contact 1x
Serial Connectivity Optional: UART, RS232/485 (ModBus), USB
Configuration Via integrated WiFi module, web-based
Communication Protocol Data CSV / FTP
MQTT on demand
SMS on demand
Security Opt. TPM module
Operating Temperature +5..+35 °C, other ranges on demand
Storage -20..+60 °C
Safety / EMC / RF CE
Tariff Information 8517 6100

Communication ZigBee
Protocol / Frequency IEEE 802.15.4 ZigBee,  max. 250 KBit/s, ISM 2.4 GHz
Role / Mode Router
Max. direct joined end nodes 20, use further routers for additional end nodes
Transmit Power +8 dBm (6 mW)
Receive Sensitivity -102 dBm
Antenna Internal, PCB
Encryption AES128

Communication Wireless M-Bus (MBS-)
Protocol / Frequency OMS / Wireless M-Bus 868 MHz
Role / Mode End-Node
Operation Mode: T1
TX Cycle:
60s mains powered
300s battery powered
Transmit Power +10 dBm
Receive Sensitivity -112 dBm
Antenna Internal, PCB

Communication Wireless LAN (WiFS-)
Protocol / Frequency IEEE 802.11 b/g/n
Role / Mode Configuration: Access Point
Operation: Client
Transmit Power Max. +19.5 dBm
Receive Sensitivity Max. -98 dBm
Antenna Internal, PCB
Encryption WEP, WPA, WPA2

Communication LTE
Bands B1/ B2/ B3/ B4/ B5/ B8/ B12/ B13/ B18/
B19/ B20/ B28
Standards LTE Cat M1 & Cat NB1 (NB-IoT)

Ordering / Options:
For project inquiries and configuration options please contact us.
Date: 03/04/19, Version: 1.0

pikkerton GmbH
Kienhorststrasse 70
D-13403 Berlin
Tel.: +49 30 3300724-0
Email to pikkerton

Contact  Imprint  | pikkerton GmbH - Phone: +49.30.3300724-0